Vim li cas thiaj siv R-hom chim plugs rau Hlau Pails?

Vim li cas thiaj siv R-hom chim plugs rau Hlau Pails?

1. Qhov teeb meem yog dab tsi?

The standard Hubei steel barrel steel barrel plug is designed with a washer at the cylindrical neck of the flange of the barrel plug, and the gasket is just below the edge. Due to these designs, when the bung is tightened, the gasket may be squeezed out between the bung and the flange. This condition is often referred to as "out of the loop" and can cause serious failures when installing barrel stoppers on automatic filling lines. With standard bung designs, when the bung is removed, the bung gasket can sometimes "snap" on the flange, this "pinch-in" effect can cause the gasket to get stuck or damaged and fall into the bail, causing the steel Contamination of the product in the barrel can also cause blockage of the filling line.

2. Qhov kev daws teeb meem yog dab tsi?

The unique R-shaped bung design, G2 steel and plastic bungs, keeps the gasket firmly in place on the bung. The inwardly angled washer neck "retains the ring", reducing the risk of washer "out of the ring" when the bung is tightened at the recommended installation torque. The neck "retaining ring" of the bung ensures that the gasket remains in the correct position when the bung is unscrewed, reducing the risk of "pinch-in".